TIMTEC-BB SBB006695
2-(Trifluoromethyl)benzyl chloride
CAS: 21742-00-7
Molecular Formula: C8H6ClF3
TIMTEC-BB SBB006695 - Names and Identifiers
| Name | 2-(Trifluoromethyl)benzyl chloride |
| Synonyms | TIMTEC-BB SBB006695 o-(Trifluoromethyl)Benzyl Chloride α'-chloro-α,α,α-trifluoro-o-xylene à'-chloro-à,à,à-trifluoro-o-xylene 2-(Trifluoromethyl)benzyl chloride 2-(TRIFLUOROMETHYL)BENZYL CHLORIDE 1-(chloromethyl)-2-(trifluoromethyl)benzene ALPHA'-CHLORO-ALPHA,ALPHA,ALPHA-TRIFLUORO-O-XYLENE |
| CAS | 21742-00-7 |
| EINECS | 244-560-6 |
| InChI | InChI=1/C18H10F12O2/c19-15(20,21)13(31,16(22,23)24)11-5-1-9(2-6-11)10-3-7-12(8-4-10)14(32,17(25,26)27)18(28,29)30/h1-8,31-32H |
| InChIKey | BBXDMCQDLOCXRA-UHFFFAOYSA-N |
TIMTEC-BB SBB006695 - Physico-chemical Properties
| Molecular Formula | C8H6ClF3 |
| Molar Mass | 194.58 |
| Density | 1.337g/mLat 25°C(lit.) |
| Boling Point | 67-68°C 12mm |
| Flash Point | 158°F |
| Vapor Presure | 7.78E-08mmHg at 25°C |
| Specific Gravity | 1.337 |
| BRN | 389380 |
| Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
| Sensitive | Lachrymatory |
| Refractive Index | n20/D 1.469(lit.) |
TIMTEC-BB SBB006695 - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | R34 - Causes burns R36/37 - Irritating to eyes and respiratory system. |
| Safety Description | S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S27 - Take off immediately all contaminated clothing. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3265 8/PG 2 |
| WGK Germany | 3 |
| HS Code | 29039990 |
| Hazard Note | Corrosive/Lachrymatory |
| Hazard Class | 8 |
| Packing Group | III |
TIMTEC-BB SBB006695 - Introduction
2-(Trifluoromethyl) benzene chloride is an organic compound with the chemical formula C8H6ClF3. It is a colorless and transparent liquid with a strong chlorine smell and spicy taste. The following is a description of the properties, uses, preparation methods and safety information of the compound:
Nature:
-Appearance: colorless transparent liquid
-Boiling point: 148-149 ℃
-Density: 1.329 g/mL
-Melting point: -34 ℃
-Stability: stable, but reacts with strong alkali and strong acid to generate harmful gas
-Solubility: Soluble in many organic solvents, such as ethanol and ether
Use:
2-(Trifluoromethyl)benzyl chloride is mainly used as initiator and crosslinking agent in organic synthesis. It can be used as an initiator for catalytic polymerization, polymer crosslinking and the preparation of alcohol ester resins. In addition, it can also be used to prepare some drugs and pesticides.
Method:
2-(Trifluoromethyl)benzyl chloride is usually obtained by chlorination of trifluorotoluene. In the reaction, trifluoromethylbenzene is chlorinated by treating a transition metal catalyst and chlorine gas to form o-trifluoromethylchlorobenzene, which is then reacted with benzyl chloride to obtain the final product.
Safety Information:
-Contact: Avoid skin contact, which may cause irritation or allergic reactions.
-Inhalation: Avoid inhaling vapors or gases of the substance, which may cause suffocation in confined spaces.
-edible: not edible, may cause poisoning.
-Storage: should be stored in a dry, well-ventilated place, away from heat and fire.
-Waste disposal: Disposal shall be carried out in accordance with local regulations and shall not be dumped.
Please note that when using or handling 2-(Trifluoromethyl)benzyl chloride, strict chemical safety procedures must be followed and appropriate protective equipment must be worn.
Nature:
-Appearance: colorless transparent liquid
-Boiling point: 148-149 ℃
-Density: 1.329 g/mL
-Melting point: -34 ℃
-Stability: stable, but reacts with strong alkali and strong acid to generate harmful gas
-Solubility: Soluble in many organic solvents, such as ethanol and ether
Use:
2-(Trifluoromethyl)benzyl chloride is mainly used as initiator and crosslinking agent in organic synthesis. It can be used as an initiator for catalytic polymerization, polymer crosslinking and the preparation of alcohol ester resins. In addition, it can also be used to prepare some drugs and pesticides.
Method:
2-(Trifluoromethyl)benzyl chloride is usually obtained by chlorination of trifluorotoluene. In the reaction, trifluoromethylbenzene is chlorinated by treating a transition metal catalyst and chlorine gas to form o-trifluoromethylchlorobenzene, which is then reacted with benzyl chloride to obtain the final product.
Safety Information:
-Contact: Avoid skin contact, which may cause irritation or allergic reactions.
-Inhalation: Avoid inhaling vapors or gases of the substance, which may cause suffocation in confined spaces.
-edible: not edible, may cause poisoning.
-Storage: should be stored in a dry, well-ventilated place, away from heat and fire.
-Waste disposal: Disposal shall be carried out in accordance with local regulations and shall not be dumped.
Please note that when using or handling 2-(Trifluoromethyl)benzyl chloride, strict chemical safety procedures must be followed and appropriate protective equipment must be worn.
Last Update：2024-04-09 15:17:55
Supplier List
Product Name: 2-(Trifluoromethyl)benzyl chloride Request for quotation
CAS: 21742-00-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
CAS: 21742-00-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
Product Name: 2-(Trifluoromethyl)benzyl chloride Request for quotation
CAS: 21742-00-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
CAS: 21742-00-7
Tel: +86-21-56795779
Email: charles7788@worldyachem.com
Mobile: +86-13651600618
QQ: 2850607228
Wechat: 13651600618
WhatsApp: +8613651600618
View History